Posted by Ryan (IP: 209.255.228.53) on April 19, 2000 at 18:34:33:
In Reply to: Re:Pretty easy really.. posted by Charlie on April 19, 2000 at 15:34:19:
I had some sub connectors installed about a month ago. They were made by Southside Machine. They welded onto the botom of the front sub and went back to the bottom of the rear. It was pretty straight forward flat welding. The only modification is were the hook for the Emergency cable goes into the sub on the passenger side. The connectors will go over the hole for it, so I made a bracket hang off the side of the connector for the hook to go into. I ordered them through the Jeg's catalog. They aren't in the catalog but they can get them.