Re: 351W Headers


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by Bill Shepherd (IP: 199.174.135.115) on February 29, 2000 at 09:16:30:

In Reply to: 351W Headers posted by David Williams on February 28, 2000 at 22:46:56:

: I'm running a 351W in my 1972 Grabber, what I need is a set of headers that will fit? I know the 302 headers won't b/c they don't turn down sharp enough to clear the shock towers. Any help would be apreciated, if anyone has a pair they would like to sell let me know. Right know my car is 12 seconds compatable, but with a good pair of headers low 12's are reasonable.

David, headers for a 351W in a '65-66 Mustang will work. Those cars had closer shock towers than Mavs. I'm doing the same swap in the summer.Hedman has them in both long and short tube.Check some of the early Mustang sites,they have alot of info that can be used on Mavs. Hope this helps, BILL


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]