Posted by Craig Selvey (209.212.219.112) on March 02, 2001 at 21:41:13:
In Reply to: Tranny orientation question ( this is easy) posted by Larry Pomorski on March 02, 2001 at 21:07:45:
_______________________________________
On your earlier post I thought about the fact that your motor might be two far forward. Since this has been a swap...are you sure the V-8 motor mounts were used? check into that.
======================================
: Are the 2 tranny mount bolts supposed to be all the way
: to the front of the tranny crossmember? My '75 still has
: the stock I6 tranny crossmember, but a 302 has been swapped into
: its place & the tranny is as far forward as it can go.
: If the motor could go back an inch my headers
: would fit. Thanks!