Thanx again for all the help!


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]

Posted by Mark G (IP: 205.188.198.41) on March 24, 2000 at 14:29:31:

In Reply to: You need disc spindles.. posted by Charlie on March 23, 2000 at 20:29:50:

: The only way to bolt the caliper on is with a disc brake spindle. My catalog is not illustrated so i dunno if the Versailles lower ball joint will bolt to the Maverick lower control arm, if it does not then you'll have to use the Lincoln control arm too, which should fit the Maverick.
: I paid $600 for my Versailles, sold the car w/o the rearend for $300 (it had a 351). The 302 is not really desirable, probably has the VV carb and all the smog & vaccuum lines, etc.
: Good luck, and if you need more Versailles info for swapping it to your 'stang check my website at the link below- goes straight to the Versailles section.




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Maverick Message Board ] [ FAQ ]